R7848A1008 Flame Amplifier

$408.75

HONEYWELL R7848A1008 Flame Amplifier

R7848A1008 Infrared Amplifier for use with C7015 detector solid state plug-in amplifier. 2 or 3 seconds flame failure response time when used with 7800 Series Relay Modeule and C7015 infrared.

Out of stock

SKU: R7848A1008 Flame Amplifier Honeywell Category:

Description

R7848A1008 Dynamic self-check flame amplifier. Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.

Features

  • Flame failure response time of 0.8 or 3.0 seconds.
  • Flame signal strength ranges from 0.0 to 5.0 Vdc.
  • Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
  • Flame signal test jacks to measure amplifier flame signal voltage.
  • Color-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
  • Compatible with existing Honeywell flame detectors (order separately).

 

Product Specifications

Approvals, Underwriters Laboratories Inc. Listed: File No. MP268, Guide No. MCCZ

Approvals, Canadian Standards Association Certified: File No. LR95329-3
Flame Failure Response Time (sec) 2.0 sec or 3.0 sec
Approvals, Swiss RE Acceptable
Approvals, Factory Mutual Approved: Report No. 1V9A0.AF
Self Checking None (standard)
Use With Primary Safety Control 7800 SERIES Relay Modules
Use With Flame Sensor Gas, oil, coal: Infrared ( lead sulfide) C7015

Click the link for more product specifications

 

Additional information

Weight 1 lbs
Dimensions 6 × 4 × 6 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.