Description
226UT “Y” Blow-Off Valve
Complies with MSS-SP-80-2013
CRN OCO7135.2
200 WSP @ 406° Max • 400 WOG
Non-Shock Service • 100% Pressure Tested
Threaded Ends • Rising Stem • Swivel Disc Holder
PTFE Disc • Integral Seat • Max Pressure for Boiler Blow-Off 160 PSI
*Contains Lead. Not Intended for Use in Potable Water Systems*
Care must be taken in blow down piping so that no water hammer effect causes shock to the “Y” blow down valve, especially in cases where a boiler has two blow down lines. In such cases both lines should be piped to a common set of blow down valves or each blow off line should be piped separately to the blow down separator. Excessive water hammer or shock can destroy valves and piping and could cause injury.
Reviews
There are no reviews yet.